Skip to main content


Repair Refrigerators

Try These DIY Hacks to Repair Refrigerators at Ease

By Repairing

When your refrigerator malfunctions, life goes messy. Undoubtedly it’s the most used appliance in your household. Proper maintenance is essential to keep your freezer in optimal condition. However, it is not always possible to predict occasional refrigerator malfunctions. Thus, how can you repair refrigerators efficiently and affordably when it does not function properly?

Pocket-Friendly Tips for Repair Refrigerators

Before hiring a professional service, you can opt for a few DIY methods to repair your refrigerator and save money. Here are some repair tips you can follow to address common problems fast:

Check Condenser Coils for Cooling Related Problems

Check if the light turns on when you open the door. If not, make sure that the fridge is properly plugged in. Also, examine the breaker panel to ensure an uninterrupted power supply.

Sometimes, the fridge runs but with an inadequate cooling effect. What to do in such a situation? The first thing to do is to check the temperature control dial. Make sure that it is in the right position. If food containers block the vents and freezer compartments, your fridge may not get cold enough.

Another way to repair the refrigerator for inadequate chill is to remove dust from the condenser coil. It improves the airflow through the coil to let the fridge cool properly. You can use a long brush to eliminate the dust. Check the fan for dust. If it is dusty, you should vacuum it to ensure smooth operation.

Examine the Inlet Tube and Saddle to Fix Ice Maker Issues

Unfasten the icemaker and unplug the wiring harness to access the water inlet tube. Low water pressure may make the tube plugged. If the drizzling water freezes, you may find a plugged one. The next step is to melt the ice in the inlet tube.

A saddle valve is the one that connects the ice maker to the home water supply. The needle hole of this valve may clog to cause blockage. Rotate the saddle valve in the clockwise direction and tighten it to eliminate mineral deposits. Turn the valve to its original position after completing the unclogging task.

Inspect the Fan Motor to Prevent Unwanted Noises

What makes a fridge noisy? Most probably, the source of the problem could be the condenser fan motor. The evaporator fan motor may also contribute to making a fridge noisy. Check whether the sound is coming from the compressor or fan.

The back cover needs to be unscrewed before checking the exact source of the sound. The noise from the fan motor can be eliminated by replacing it with a new one. If the noise comes from the compressor, you may consider buying a new fridge.

Takeaway on Repair Refrigerators

These 3 DIY tips will help you solve common problems efficiently and save money. Never undermine the importance of timely refrigerator maintenance. Many people ignore minor issues and keep them unattended for a long time. The consequence will be expensive repair work. Do not let it happen to your refrigerator.

If you don’t have the tools and experience to repair refrigerators, you can hire a professional home appliance repair service. Experienced professionals perform all tasks with meticulous precision. They have the tools and expertise to solve any complicated repair task responsibly and efficiently.

refrigerator problems

What Are The Refrigerator Problems That Call For Professional Help?

By Repairing

Life might be difficult to picture if you have refrigerator problems. You depend on your refrigerator daily to keep perishable items fresh and secure from harm. Regrettably, one of your home’s most important items sometimes gets overlooked.

Your refrigerator requires maintenance from time to time, just like any other item in your house. Regrettably, many individuals fail to notice the symptoms that a refrigerator needs serious repair. Ignoring these warning signs to avoid having to replace your refrigerator much sooner.-

  • Quick Food Spoiling:

You can observe milk and meats, two meals that are particularly susceptible to rotting, going bad earlier than you anticipated. Although some meals fail to cool down, canned beverages may take significantly longer to cold.

Any one of your refrigerator problems might be the cause. For instance, faulty door seals might let heated air inside your refrigerator, which can affect its functionality. Also, a sluggish refrigerant leak might reduce the cooling power of your refrigerator. Get a professional to take a closer look if your refrigerator is having trouble maintaining its cold.

  • Ice-build:

To avoid the formation of frost and ice, the majority of contemporary refrigerators contain an automated defrosting mechanism. Nevertheless, this function is only sometimes reliable, and ice building may be so severe that it defeats the refrigerator’s built-in safety measures. The refrigerator could require some time to defrost properly, so unplug it for a bit.

You should get an ice accumulation issue checked out as soon as possible by a service expert.

  • Loud noise:

Your refrigerator is designed to operate enough to be ignored even if it isn’t completely silent. Another sign that anything is amiss with your refrigerator is excessive noise. Before further issues arise, inspect the refrigerator to see if you can hear it buzzing or humming from the opposite side of the kitchen.

  • Too Much Condensation:

On a hot day, if your refrigerator perspires as much as you do, you could be dealing with condensation. A vapor trapped in heated air condenses into a liquid when it becomes cold. Condensation is a normal by-product of refrigeration that keeps your food fresh.

Overload drip trays that overflow and leak water may also cause leaks. Many hazardous risks, including electrocution, can result from even a tiny water spill. You should have a service specialist examine these problems as soon as possible.

  • Become heated:

A refrigerator repair is necessary if passing by your refrigerator feels as warm as passing by your baseboard heater.

Feel the refrigerator’s back. Anytime the temperature rises over lukewarm, the motor works too hard and becomes too hot. To get the motor fixed as possible in this situation, you can arrange a service. If you need more money, you can find yourself paying a higher monthly power bill.

  • Bill goes up:

Refrigerator problems can cause your electricity bill to appear slightly higher than usual. It could be necessary to replace your refrigerator if you’ve tried to enhance its functionality without success.

Avoid wasting money by allowing your food to expire and your electricity costs to soar. It is essential to act now that you are more aware of the warning signs that your refrigerator may need maintenance.

washing machine not draining

Washing Machine Not Draining- Know Why!

By Repairing

Losing control over your washing machine will probably be the last thing you want. But what can you do then? Machines are bound to go out of function. And that is fine. However, leaving that dysfunctional washing machine unattended will be a wrong move. So, what are you going to do with a washing machine that is not working correctly?

We will take you there. Here we will talk about some of the most frequent reasons for Washing Machine Not Draining. However, it will always be wise to seek help from a professional appliance repair expert. And even if you are able to solve the problem temporarily, try to consult with a professional home appliance repair expert later.

Now, let’s dive into the probable reasons for a Washing Machine Not Draining.

5 Reasons Why Your Washing Machine Is Not Draining

You cannot solve all the problems at home. Therefore, if you are not confident enough, better to visit your trusted appliance repair service provider. However, you must know what the reasons are. So, you can discuss the problem with your servicing team.

washing machine not draining

1.       The problem with the drain hose

The rubber drain hose can be running from the back and the wash tub is probably clogged with clothes. And that can be a potential reason for insufficient water drainage. To check this matter in detail, remove the drain hose and blow air through it. If there is no obstacle, then the problem is probably in the washing machine pump.

2.       The problem with the drain pump

The drain pump is the main thing of a washing machine for draining the water. Now, if you hear the pump is making an unusual sound and the drainage is not up to the mark you need to check. The pump can be clogged with fabrics in the corrugated tube.

Now, most pumps come with removable covers with a filter inside the pump. If the clog is here, you can easily clean up the pump and fix the problem.

In some top-loading washing machines, the pump is located in the back of the machine, on front loaders, and just below the door. Clean the lint and assemble it as it was.

Even after checking the clogged parts, if you are not getting the desired result, then the pump is broken. And you need to replace the pump.

3.       The problem is the drive belt

The pump of the washing machine works with a drive belt snug closely around the pulleys on the bottom of the washing machine’s motor. If the belt is not tight enough, the machine will face difficulties while draining. To fix this problem, you need to turn the machine upside down and examine it. So, if you don’t have any helping hand, it is better to leave the work in the expert’s hand.

4.       The problem with the lid switch

There is a small plastic switch just under the lid of the washing machine. It senses whether the door is closed or not. Until the lid is closed properly, the washing machine won’t start working. And in case the washing machine starts working, it won’t be without any issues. And that is where you can face a drainage issue. 

So, check if the washing machine lid is closed properly or not. If you find the machine is not locked, press the lid switch with your hand and wait until you hear a click sound. In case you still can’t hear that it is time to replace the washing machine’s lid switch.

5.       The problem in the plumbing system

Even after going through all the above parts, you don’t find any dispute, you need to check the plumbing system. In most cases, the small microfibers from the clothes accumulate in the pipeline, resulting in blocking the water flow. As a result, the entire washing machine hits an abrupt halt.

The drain hose of the washing machine goes a few inches within the pipe. So, there is a high chance of depositing dirt and lint in that part. Make sure, if the problem is there or not.

So, these are the most probable reasons your Washing Machine Not Draining. But, even after going through all these parts your machine does not drain, call your plumber. 

How to Fix a Squeaky Dryer

How to Fix a Squeaky Dryer: Expert Guide

By Repairing, Washing Machine Repair

Introduction to How to Fix a Squeaky Dryer

If your dryer makes a lot of noise, doing the laundry might be annoying. Your dryer may squeak due to several problems, including a malfunctioning dryer belt, unlubricated roller wheels, and erosive bearings. You will need to buy replacement parts, get a tool kit, spend time watching dryer repair tutorials on YouTube, or read your dryer manual before you can fix your squeaky dryer.

You must disconnect your squeaky dryer before you start mending it to avoid mishaps and also make sure you have a spacious and spotless work area. Any parts which, accidentally fall to the floor will be visible in a clean space.

A squeaky dryer is a sign that you need to address any issues with the equipment as promptly as possible. If you are a novice, you can contact a professional to assist you in diagnosing the issue with your dryer. It would be beneficial if you were aware that there are several potential causes for the squeaky sounds made by a running dryer.

Until you open the dryer, you might not be able to determine which one you have. The best part is that dryers don’t have a lot of moving parts that could malfunction; as a result, you can simply identify the noisy component.

A few reasons are discussed here for squeaky dryers, along with potential fixes for each.

A defective dryer belt

The dryer drum is encircled by a long, slender rubber belt called the dryer belt. Typically, the pulley is connected to the motor before the belt is fastened to it. The idler pulley will rotate whenever the motor is running, which will turn the drum and the belt.

Depending on how frequently you use the dryer, your belt may suffer from severe wear. Regular spinning could stretch your dryer belt, which would decrease efficiency. The belt will not be able to spin a metal drum if it is not properly fastened to it. It’s not a wise idea to combine metal with loose rubbers. The squeaky dryer sound can be the result of friction between the two components.

You can instantly determine if the squeaky noise is coming from your belt when you open the dryer. Replace the belt if the rubber is found to be loose. Be aware, that you can’t replace anything until you unplug the wire harness plug and remove the mounting screws. You’ll find instructions for doing this in your manual.

It shouldn’t be challenging to replace the old belt once you remove any parts that can obstruct your access to it. The new belt just needs to be looped around the two pulleys in the same manner as the old, pooled belt.

Bearings for Drum Glides

You can have faulty gliding bearings if the noises you hear from the squeaky dryer don’t come from a broken wheel or a piece of loose rubber but rather sound like metal or plastic. A drum’s edges are covered with microscopic nylon, or plastic glides. They are frequently affixed using several locking tabs.

You will need to remove the complete dryer drum if you find that your glide bearings are malfunctioning. As soon as you’ve done that, you can use pliers to aid you in pressing the tab pairs back into their openings and separating the beatings.

Idler Pulley

The idler pulley and the motor pulley are most likely the two pulleys in your dryer. Between the dryer belt and the motor is where you’ll find the idler pulley. It could lose stability or begin to wiggle, producing a squeaking sound since it is a spinning wheel.

By manually spinning the idler pulley, you can determine whether it is the cause of the squeaking sounds. You can take the pulley off of its bracket and swap it out for a new one once you’ve ascertained that the pulley is what’s causing the squeak. You must put the belt and the other components back in their place once you’re done.

After reading the dryer’s instruction manual, you may replace an idler pulley without much difficulty. The difficult aspect may be finding one that is functional with your dryer since you should not settle for any substitute which gets your way.

Damaged, noisy motor

It could be preferable to purchase a new motor if your current one is noisy. However, purchasing a new motor would be quite expensive, in addition to paying for the electrician’s services. The best possible solution might be to replace your squeaky dryer with a new one if its motor is noisy.

However, you should buy a new motor if you are determined to fix the problem. Finding a motor that is a perfect match for your dryer will be the most difficult part. Once you have one, you might need to remove the rear panel of your dryer by unscrewing the screws at the dryer’s back. Work until you’ve removed everything that’s impeding access to the motor.

After accessing, detach it so that you may start the replacement procedure.

Get the motor replaced, then assemble each component in reverse order. It may be better to seek professional assistance if you’re replacing a motor because it might be somewhat complicated.
It would be wise to get a new motor if you discover that yours is beyond fixing.

Fan or blower wheel

When heated, the blower fan, which is a wheel made of metal, nylon, or plastic, sucks air into the dryer. The hot air is forced through the drum and out of the vent by the fan. Over time, the blower fan may accumulate lint or debris. That could cause damage to the fan, thus making a squealing noise.

You should check your blower wheel from the dryer’s back if you think it’s the source of the squeaky sounds. For the fan to suck air in, most dryers feature a vented access panel at the bottom of the dryer back. If necessary, remove it, clean it, check the fan’s rotation, and ascertain whether it’s creating any undesirable noises.


Now you know, How to Fix a Squeaky Dryer by yourself. The dryer is a necessary item in the majority of households, and with proper care, it might last for many years. You should be concerned if you have a squeaky dryer since it could be a sign of something more serious.

The fact that there aren’t many moving parts in a dryer makes it easier to pinpoint the source of the squeals. As soon as you determine the causes, fix, or replace the problematic parts. Because failing to do so may necessitate replacing the dryer entirely.

But it is always recommended that you must call your nearest experts who know How to Fix a Squeaky Dryer efficiently.

refrigerator not getting cold?

Is Your Refrigerator Not Getting Cold? See its Five Reasons

By Repairing

In order to prevent your perishables from rotting, you need to take fast action to fix the refrigerator’s issues. One must ascertain what is wrong when the refrigerator not getting cold to address the problem. Therefore, here is the list of five reasons why your fridge isn’t chilling.

Reasons for a refrigerator not getting cold

Low thermostat temperature
Your refrigerator’s temperature may rise unexpectedly if the thermostat dial is too low. It might occur if you have small kids or careless house guests who mess with the thermostat, resulting in the refrigerator not getting cold.
People frequently find the thermostat numbers puzzling and regulate their thermostats in the wrong way as a result. Remember that the numbers represent the power level; thus, higher numbers will result in a colder refrigerator.

refrigerator not getting cold

Blocked vents and soiled condenser coils

Across a network of internal and external vents, the air temperature of your refrigerator is maintained. These vents must stay open to maintain a constant temperature.

Moreover, sometimes people can block the vents when keeping food inside the refrigerator.
Besides, a partially clogged vent is responsible to creates dirt, spilled food, or other debris.

So, it’s crucial to keep the vents as clean as possible. Otherwise, any obstruction can affect the interior temperature of your house.

The heat from inside the refrigerator is released through the condenser coil. The fridge will operate more vigorously to dissipate heat if the coils are unclean.

If your kitchen has a lot of dust or pet hair, you need to clean the condenser coil. Clean is necessary more frequently than once a year. A dirty coil could have an effect on performance, but you can clean it with a long brush or a vacuum.

It should be able to release heat effectively once more after being cleaned. All of this contributes to the problem of your refrigerator not getting cold.

Broken Condenser Fan Motor

The condenser fan motor draws air over the components to cool the condenser coils. It may need to be repaired for the refrigerator does not get cold.

On the other hand, your refrigerator can get overheated if it doesn’t have a working fan.
The condenser fan motor of the refrigerator is found behind or underneath the unit. There will probably be a need for professional repair if the fan motor has broken.


Failure of the evaporator fan motor

The number of evaporator fan motors in your refrigerator will depend on its model. If your appliance has just one fan, it will be in the freezer section.

The cold air from the evaporator coils is dispersed throughout the compartment by the evaporator fan motor. You can have a cold freezer but no chill in the refrigerator compartment if the fan motor isn’t working.

Damaged control boards
The main control board and the temperature control board are the two circuit boards used in a modern refrigerator.

Your refrigerator not getting cold could be caused by damage to either of these control boards. If you suspect a control board failure, soon contact a service technician.


The refrigerator is the star of your kitchen that helps to keep your food cool and fresh. It can be worrisome to discover that your fridge is not chilling properly.

It needs a thorough inspection to unveil the reasons for the refrigerator not getting cold. Any malfunctioning parts can be hard to repair and replace, so it is best to leave them in the hands of a competent expert.