Skip to main content

Oven Repair Guide

Oven heating element

How Can You Safely Repair the Heating Element of Your Oven?

By Oven Repair Guide

Any cooking equipment you buy tries its best to make your life easier. No matter how good they work today, there comes a time when they need your care. One such piece of equipment is your oven. And you will likely face issues with your oven heating element. So, it’s crucial to know the signs of problems and how to replace your oven’s heating element.

What is an Oven Heating Element?

The other name for your oven’s heating element is the baking coil. This heating element remains attached behind your oven’s back wall. You can find this back wall at the bottom of the oven. You will also see a broiling element on top. This heating element uses the Joule heating process to convert electrical energy into heat energy. And this heat helps in baking or cooking meals inside your oven.

How Will You Know If the Heating Element Needs Repair?

Here are some signs that indicate your oven heating element needs repair:

No Bright Orange Glow- As your oven’s heating element fully heats at 350 degrees, you will spot a bright orange glow. If you don’t see this glow, that indicates something is wrong and that you should call professionals for repair.

Issues with Food Quality- As the heating element doesn’t turn bright orange, it leads to unsatisfactory food quality. And that is another reason why you should go for a timely repair.

Appearance of Cracks- Do you spot cracks and blisters in your oven? That’s usually common with well-used ovens. And again, it increases the need for repair and removal of the heating element for inspection.

Cooking Issues- Uncooked food clearly shows that your oven’s heating element needs repair.

What are the Steps to Repair the Oven Heating Element?

  • The repair process begins with a careful physical inspection of the oven’s heating element.
  • A multimeter helps to check the functionality of this heating element even if nothing seems wrong with it.
  • It’s important to take care of your safety before the inspection begins. So, be sure to unplug the oven from the power source.
  • Carefully look for signs of damage like loose wires and observe the heating element’s wirings and terminals.
  • Begin inspection with wiring and elements after detaching your oven’s back panel.
  • You will have to test for continuity if you don’t find any damage to the heating element.
  • Now, carefully remove the oven’s heating element and then turn the multimeter setting to RX1.
  • Next, you have to connect this multimeter to the terminals of the heating element.
  • A normal reading would range between 19 and 115 ohms. You can learn about the specifics from the manual.
  • If the resistance of the element stays off, you should replace the oven’s heating element.

Why It’s Better to Take Help from the Professionals?

Although you may opt for DIY inspections, it’s always better to consult professionals who have expertise in oven or stove repair. These professionals can identify the problems faster and take care of the safety precautions. Furthermore, they come with the latest tools and quality assurance to give you peace of mind.


Oven Repair Guide – Decoding Common Oven Issues and Unveiling the Best Solutions to Fix Them

By Oven Repair Guide

An oven is a precious addition to your kitchen. It makes cooking easy, effortless, and enjoyable. Further, you can experiment with baking, toasting, and grilling and enjoy delicious food you have never tasted. However, you cannot expect your oven to last forever. Over time, constant working leads to wear and tear and malfunctioning. This oven repair guide discusses the most common oven issues and their solutions.

Oven Repair Guide for Common Oven Issues

Inefficient Cooking

Many people complain that the food doesn’t taste as good as it used to be. It suggests that the cooking prowess of the oven has come down drastically. What could be the reason? Most probably, the heating element is causing the difficulties.

How to solve this issue? Turn off the power before loosening the screws of the heating element to check thoroughly. If it seems faulty, replace it with a new one. If you have doubts, contact an appliance repair specialist to perform this task.

Unusual Temperature Variations

Under normal circumstances, the oven produces consistent heat to promote even cooking. A faulty thermostat or sensor can make the temperature inconsistent. It is a common issue that people encounter gradually over time.

Any oven repair guide would recommend recalibration. Thermometers can help you with that. Follow the guidelines of the manufacturer to ensure proper temperature calibration. If it does not address the issue, examine the sensor. Make sure that it is not in contact with the heating element. Moreover, you can use an ohmmeter to assess the condition of the sensor. Replace the damaged sensor if needed.

Jammed Door

A jammed door can disrupt your cooking schedule. If the door does not close tightly, you cannot expect 100% efficiency.

Switch off the oven for a few minutes when you experience the jammed door issue. Disconnect the plug from the power source. Once it cools down, switch on the oven again to check if the problem is solved. If it does not, take out the door from the hinges. Examine the springs and hinges closely. If you notice any damaged component, replace it to solve the issue.

Failing to Power Up

Sometimes, your oven may refuse to turn on. It can be frustrating, especially in the morning. An electrical problem could be the possible reason. A defective ignitor can also cause this problem.

Do you have a gas oven? Then, check whether the range ignites or not. If the range fails to ignite correctly, opting for a replacement is the optimal solution. If there’s no response from either source, it’s advisable to seek professional assistance as the issue may lie within the gas line.

Are you using an electric oven?

Look at the unit to see whether it is drawing power. If you see an inactive display, the circuit must be reset at the breaker. Sometimes, the light may turn on without heating the oven. It suggests internal wiring or heating element issues.

These are the most common issues and solutions you can come across in an oven repair guide. Contact an experienced oven repair expert to solve more complex issues.